Introduction of Release Wax HL602
High performance mold release agent suitable for epoxy resin and polyester resin
Application of Release Wax HL602
This product is a wax that is used independently to release molds for polyester or mold casting applications.
Features of Release Wax HL602
- Easy to use without any complex and difficult instructions
- Without dangerous solvents
- Easy to polish.
- After one polishing, it can be produced several times
- Easily separated from the surface of the mold.
Important points regarding the use of Release Wax HL602
The model on the used wax molds should be molded with circular movements and over the entire surface.
Immediately buff with a clean dry cotton cloth to a thin layer. The mold must remain standing.
For 10-20 minutes to dry. Finally, the mold should be cleaned and polished with a clean cotton cloth.
The mold is ready for casting or gel coat.
Do not use Release Wax HL602 with PVA-based release agents
Packaging of Ilkester Release Wax HL602
700 grams
Durability of Release Wax HL602
This separating wax product has a shelf life of up to 1 year from the date of production and storage in optimal conditions.
Reviews
There are no reviews yet.