Introduction of Ilkester Provaks Plus
High performance mold release agent suitable for epoxy resin and polyester resin
Application of Ilkester Provaks Plus
This product is a wax that is used independently to release molds for polyester or mold casting applications.
Features of Ilkester Provaks Plus
- Easy to use without any complex and difficult instructions
- Without dangerous solvents
- Easy to polish.
- After one polishing, it can be produced several times
- Easily separated from the surface of the mold.
- 6 production series with 1 consumption
Important points regarding the use of Ilkester Provaks Plus
The model on the used wax molds should be molded with circular movements and over the entire surface.
Immediately buff with a clean dry cotton cloth to a thin layer. The mold must remain standing.
For 10-20 minutes to dry. Finally, the mold should be cleaned and polished with a clean cotton cloth.
The mold is ready for casting or gel coat.
Provaks Plus is not compatible with substances containing compounds such as alcohol or water.
In glossy and low-risk formats, you can get up to 6 production series with 1 Provaks Plus program.
Do not use Provaks Plus with PVA-based release agents
Packaging of Ilkester Provaks Plus
300 grams
800 grams
Durability of Ilkester Provaks Plus
This product from Ilkester separator has a shelf life of up to 1 year from the date of production and storage in optimal conditions.
Reviews
There are no reviews yet.