Introduction of Release Wax
High performance mold release agent suitable for epoxy resin and polyester resin
Application of Release Wax
This wax is a wax that is used independently to release molds for polyester or mold casting applications.
Features of release wax
- Easy to use without any complex and difficult instructions
- Without dangerous solvents
- Easy to polish.
- After one polishing, it can be produced several times
- Easily separated from the surface of the mold.
Important points regarding the use of release wax
- On the molds used, the wax should be molded with circular movements and over the entire surface.
- Immediately buff with a clean dry cotton cloth to a thin layer. The mold must remain standing.
- For 10-20 minutes to dry. Finally, the mold should be cleaned and polished with a clean cotton cloth.
- The mold is ready for casting or gel coat.
- Do not use Iranian wax with PVA-based release agents.
Packaging of release wax
6 kg
Durability of Iranian mold release wax
This mold release wax product has a shelf life of up to 1 year from the date of production and storage under favorable conditions.
